Christmas Tree Crowns

Christmas is upon us, once again!

Every other year, the Church holds a Christmas Tree Festival and our toddler group always enters a tree.

This year, our tree's focus is based around the concept of the potential of each baby. 

In Jesus' case he was born to be kind, albeit not an earthly one. So this year, we made clay crowns, like these:

What child can resist a bit of bling, eh?

Equipment:

• Air drying clay* 
• Rolling pin
• Crown cookie cutter
• Drinking straw
• Paper
• Pen (for writing names)
• Paint brushes
• Gold paint
• Pot for paint
• Glittery bits (beads, sequins, gems)
• PVA glue
• Glue brush
• Glue pot
• Newspaper
• Overalls
• Baby wipes
• Scissors
• String or ribbon for hanging

Preparation:

1. Prepare pots of paint.

2. Roll out balls of clay. You could roll these out in advance, and keep sealed, but I did this on the day, as fresh clay is more pleasurable  and easier to use. I do this for them, as clay needs to be rolled evenly, and that can be hard for children to manage. If it is too thin, it will be more fragile, once dry.

3. Roll out clay (on sheet of paper) and cut out crown shapes. Remove excess clay from around cutter, before pulling cutter away. I roll out on a sheet of paper, which may sound wasteful, but sops clay from sticking to the table and makes it easy to transfer clay work away, once it is finished.

4. Make hole for hanging. The end of a drinking straw is ideal for this. If you do it in advance, the children will work around it, if you try to do it at the end, there may not be much space! 😄

I only roll out enough for one table, at first, as I don't want the clay to dry out.

Method:

1. Child paints crown gold. Yes it is on damp clay, but they will dry together. The paint will be a little thin, but using white clay means it will be fine.

2. Child adds glittery bits, by pressing them in firmly. It does not matter where they place them, or how many they use, the end effect will still be stunning.

3. Write child's name on sheet and remove to dry. This may take a day or two, depending on where you place it. 

4. When the crown is dry, paint it with PVA, across all the crown and round the edges, but not underneath. Try to keep the ole for hanging clear of glue.

5. Leave to dry (approx. 6 hours, depending on how thick your glue is).

6. Cut string or ribbon to desired length, ready to hang your ornament.

I balanced the clay crowns on small pots, whilst painting the PVA and leaving it to dry, so the edges didn't stick to the newspaper.

The completed tree!

*Resources:

Das Clay  (we use this one - widely available Hobbycraft, The Works, W
HSmith etc.)

Giotto gold paint (also available at The Range, I think)

Crown cookie cutter

Gold string for hanging (similar in Sainsbury's)

Please note: no Ads here. Resources listed, purely to help people find similar.

Autumn Leaf Plaques

This craft was inspired by a jewellery workshop I participated in during the summer in which we made pendants and earrings using a form of porcelain clay. 

One of the ideas we were encouraged to try involved pressing plant materials into the clay, then colouring the impressions with under glaze paints. The pieces were later glazed and fired for us.

For the purposes of our craft, firing was not going to be a possibility, neither would painting the pieces once dry. It needed to be an all-in-one process. So we came up with the idea of using leaf stamps, to make plaques like these:

Just like the jewellery project, this craft proved extremely popular.

Leaf Plaque

We used air dry clay for our project. I would imagine that salt dough clay could also be used, but it would require a little baking.

Equipment:

• air dry clay (we used white, but you can also buy coloured clay, although this is likely to be more expensive)

• poster paint/plastic trays/sponges

• leaf stamps (or you could use natural leaves)

• rolling pins

• paper plates or small piece of card

• pens (to label paper plates with names)

• cutters - ours was 10 cm diameter (optional)

• ribbon

• drinking straws (cut in half)

• scissors (to cut ribbon)

• PVA glue to act as a 'varnish' & brush to apply

We used these leaf stamps*

Preparation:

In advance:

• order/buy clay 

• order/buy leaf stamps (or gather leaves, you need to dry them a bit before use, but not too dry, or they will become brittle and fall apart)

• cut ribbon into short lengths

• cut a few drinking straws in half (these will be used to make a nice clean hole in the top of the plaques)

On the day:

• pour poster paint onto sponges and work into the sponge, so that it isn't just a blob on top, then place in a plastic tray. I provided just two colours: yellow ochre and brown.

Soaking the paint into the sponges helps to prevent blobby prints

• roll lumps of clay into small balls

• make an example, to show the children, before they begin

Here's the 'one I made earlier'

Method:

1. Help children into paint overalls.

2. Give each child a paper plate, ball of clay and a rolling pin. The paper plate will be used to roll out the clay, but also to take home the finished piece. This avoids making too much mess on the table, but also avoids lifting the clay plaque before it has dried, which could lead to the plaque becoming deformed. A small piece of card could be used as an alternative.

3. Children roll out clay. A round cutter can be used to make a distinct shape, or it can be left as a 'free' shape, which also looks quite visually appealing. Excess clay can be peeled off from around the edge, once the cutter has been pressed in firmly. 

This plaque is a 'free' shape. No cutter used. 

This plaque has been cut to shape with a round cutter.

4. Children make their designs, by pushing collected leaves or leaf stamps into the paint, then into the clay. As you can see from the illustrations, some used more than one stamp, creating various effects.

Another 'free' shape.

 5. Children press the end of the drinking straw into the top of the plaque, to make a hole for the ribbon, which may or may not need to be threaded by an adult. Some of the older children may be able to do this completely by themselves.

6. Write the child's name on the edge of the paper plate, on which the children will take their leaf plaques home to dry.

7. Place the paper plates on the 'home' table, until the end of the session, then use baby wipes to clean up. It is important to be thorough when cleaning up clay, as tiny dry clay particles aren't great for you, when breathed in.

8. If parents and children are returning the next week, you may wish to provide PVA to 'varnish' over the clay, or to quickly varnish them yourself, for them to pick up the following week, although this is not entirely necessary.


*We sourced ours from Baker Ross. We are not affiliated to Baker Ross in any way. We do not profit by mentioning them. Baker Ross are mentioned merely to assist sourcing of materials.

Clay Christmas tree decorations

Last year we entered a local Christmas Tree festival. 

We came up with the idea of making decorations out of clay, and I think they turned out pretty stunning!!

Each one unique!

We spread the craft over a couple of weeks, so that as many of the children that came to our group as possible would be represented on the tree.

Equipment:

• air dry clay
• rolling pin
• large Christmas cookie cutters
• drinking straw
• pencil (to label the back of each decoration)
• poster paints of various colours 
• paint pallets
• pva glue
• paint brushes
• overalls
• wet wipes
• thin gold ribbon/scissors

Preparation:

There's a fair bit of prep involved in this craft - more than we would usually allow, but this one was worth it!

We rolled out the clay and cut the shapes in advance - leaving time for the clay to harden. Whilst the clay was wet, we cut a small hole using a drinking straw, so that the decorations would be able to hang.

We did this in advance, for the children, as otherwise it would need a couple of weeks to complete the craft and not all children come every week.

Pre-cut and dried

On the day of the craft, we laid out materials for the children. We were careful to put out Christmassy coloured poster paints.

Method:

1. Make sure children roll up sleeves and put on overalls before beginning work.

2. Allow children to select tree decoration (we had two designs) and label the back of their decoration with their name - in pencil.

2. Allow children to select and apply paint, as they will! Glitter could be added at this stage, if so desired!!

3. Leave decorations to dry. This may take a few hours depending on how much paint has been applied.

4. Once dry, I applied a coat of PVA glue to add a 'varnish' to the decorations.

5. Once the PVA had dried, I tied a piece of thin gold ribbon to each decoration, so they could be hung. Once the tree festival was over, each child got to take their decoration home.

NB

If we run a craft over a couple of weeks (to try and ensure that everyone has a chance to make it), we tend to have a 'low key' craft running alongside on another table, for those who have finished quickly or have made one the week before. This will take extra prep and organisation. It may also require extra volunteers!!